Health O Meter PRO PLUS 2650KL - Manual (Page 5)

4
Figure 2
Refer to the Parts List on page 22 for details on parts
4. Insert 4 screws into the display support and tighten.
5. Connect power cord to the power port in the display assembly and insert and
secure the cable into the exposed portion of the 2nd channel from the left in the
display.
6. Insert the power cord into the retaining slot. Align the rear cover tabs with the
slots on the rear of the display assembly. Secure with 4 screws.
7. Gently tip the scale. Screw in 4 plastic feet. Do not tighten.
8.
Gently return the scale to the upright position.
WARNING: Do not drop the scale on its feet. This could result in load cell damage.
9. Screw/unscrew the plastic feet to level the scale.
ASSEMBLY INSTRUCTIONS