Holux GPSmile Pocket PC - Manual (Page 20)

Chapter 2: Basic Skills
- 20 -
screen, it may not move.
Using the Battery
To install the battery:
1. Ensure that the device is turned off.
2. Insert the left side of the battery into the battery slot at on angle, and press down
the right side into the slot until it clicks.
3. Insert the tip of the stylus into the battery lock.
4. Slide the lock to the lock position.
To remove the battery:
1. Insert the tip of the stylus into the battery lock.
2. Slide the lock to the unlock position.
3. Take the battery out of the slot.
You can replace the main battery pack without data loss
because Holux GPSmile 60 has a rechargeable backup
battery. However, the capacity of the backup battery is
limited; therefore, when you replace the main battery pack,
CAUTION