Holux GPSmile Pocket PC - Manual (Page 25)

Chapter 2: Basic Skills
- 25 -
Removing a SD Card
1. Lightly press down the card until a click is heard. The card pops out
slightly from the slot.
2. Pull out the card straight.
Connecting to a PC
Before connecting Holux GPSmile 60 to a PC, check the following:
•
ActiveSync has been installed on your PC. (For more information, see
Chapter 3.)
•
ActiveSync ports: the position of the ActiveSync port on your PC may
differ according to the PC type.
Connect Holux GPSmile 60 directly to your PC using the supplied
ActiveSync cable:
1. Connect the serial connector of the mini USB cable to the ActiveSync
Client port of Holux GPSmile 60.
2. Connect the USB connector of the ActiveSync cable to the ActiveSync port of
your PC.