Busy redial, No answer redial, Answer ring pattern – HP Series 700 User Manual

Page 29: Error correction mode

Advertising
background image

.........................................................................................................................................

2-5

T

w

o

Busy Redial

The HP OfficeJet is factory set to automatically redial at intervals
after a busy signal. You can turn this setting off.

Note:

To immediately redial the last fax number you entered on the

HP OfficeJet keypad, press the Redial/Pause button.

No Answer Redial

You can set the HP OfficeJet to automatically redial at intervals if a
fax call is not answered.

Answer Ring Pattern

The Answer Ring Pattern setting applies only if your phone line has
more than one number, each with its own distinctive ring pattern. This
is a service provided by your telephone company. If you do not have
this service,

the Distinctive Ring feature on the HP OfficeJet will not

work and the Answer Ring Pattern should be set to All Rings.

If you do have Distinctive Ring service, have your telephone
company assign one ring pattern to voice calls and another to fax
calls. Then use the Answer Ring Pattern setting to set your HP
OfficeJet to automatically answer the fax call pattern.

Note:

If you have an answering machine on this line for receiving

voice calls (using one of the other distinctive ring patterns), set it to
answer after 3 or more rings or your HP OfficeJet will not receive fax
calls.

Error Correction Mode

Error Correction Mode (ECM) reduces data lost due to poor phone
lines. In ECM, phone charges are unaffected, or may even be reduced,
on good phone lines. On poor phone lines, ECM increases sending
time and phone charges, but sends the data much more reliably.

Menu

6

then

press

2

First

press

then

press

Menu

6

then

press

3

Menu

6

then

press

4

Menu

6

then

press

5

Advertising
This manual is related to the following products: