Haan GS-30 - Manual (Page 11)

Assembling Your HAAN
®
Garment Steamer
1
➟ 2 ➟ 3
Ready to Steam
www. HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 9
2
1
There is a RED arrow on the Locking Hose Guide. Line
this arrow up to the triangle printed on the grey rim of
the hose opening in the Main Steamer Unit. Note: there
are ridges inside the opening that match up to the two
knobs on the base of the Locking Hose Guide. Aligning
these knobs, press down and
turn the guide clockwise (as
shown by the CLOSE
arrow) until the RED arrow
aligns with the black line
on the front of the rim.
Threaded
Base Ring
Insert the widest end of the
telescoping pole into the base
of the unit, aligning threads in
the base ring and turn the base
ring until tightened and flush
with the base.
➟
RED
Arrow
Knobs
Close
Locked
2
1
3
➟
3
Insert the hanger assembly to the top of the pole and
press down until it is stable. The crossbar on the hanger
locks into place at the center. Screw the lock tight
against the center pole. Unscrew and lower
sides for storage.