Haan GS-30 - Manual (Page 19)

Be sure to turn the Power Button to the OFF position
and unplug the unit. Drain all the remaining water from
the orange removable Reservoir Tank by unscrewing
the Water Refill Cap on the underside of the tank
and emptying any excess water. (Fig 23)
Then drain the interior tank by opening the Excess
Water Removal Valve found on the side of the
canister (Fig 24) and emptying the excess water.
We do not recommend storing the unit with water
in the tank for long periods of time.
Storing the HAAN
®
Garment Steamer with Garment Valet:
• Open the telescoping pole locks and lower the
pole to its lowest position.
• Position the Cross bar mid-way up the lower end
of the pole to give room to move the Crossbars
out of the way. Grasp the center pivot of the
Crossbar, pull and twist it to a vertical position.
• Hang the Steam Wand from the Wand Cradle.
• Turn the clips to the side and move them towards
the center pole. Lower the hanger sides by unscrewing
them from the center pole. The sides of the hanger
will collapse and hang vertically for storage.
• Prepare the unit for storage by looping the power
cord and attaching it by a twist tie to the vertical
Crossbar. (Fig 25)
• Store the unit upright in a protected dry, cool area.
www. HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 17
Fig 23
Water
Refill cap
Handle
Fig 24
Excess
Water
Removal
Valve
Fig 25
Care & Maintenance
(cont)