Harbor Freight Tools 92061 - Manual (Page 4)

SKU 92061 Page 4 For technical questions, please call 1-800-444-3353
cur. It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
Unpacking
When unpacking, check to make sure the following parts are included.
Flashlight
4 filters stored in the filter compartment
Spare Krypton bulb, stored in the spare bulb compartment
If any parts are missing or broken, please call Harbor Freight Flashlights at the
number on the cover of this manual.
NOTE: Warranty replacement parts or accessories specific to this flashlight are not
available from Harbor Freight Tools for this item. Replacement batteries and light
bulbs may be available at your local Harbor Freight Tools retail outlet, or are
commonly available from hardware and department stores.
Operation
First install two (2) “AA” batteries (not included).
1. Remove the battery compartment cap, located at the bottom of the flashlight,
by turning it counterclockwise.
2. Insert two “AA” batteries (not included) into the battery compartment,
observing the polarity markings on the flashlight case. Please see picture.
3. Replace the battery compartment cap, and secure it by turning clockwise until
hand tight.