Huawei DiGi Broadband HSDPA USB E219 - Manual (Page 16)

Software Manual Entering the PIN Code
When the PIN Verification is enabled, you need to enter the correct PIN code to use
the network-related functions.
1. Choose
Tools > PIN Operations > Enter PIN
2. Enter the correct PIN code
3. Click
OK to complete the verification
Note:
If you enter the wrong PIN codes for a preset number of times, the SIM/USIM card
is locked and you cannot use it until you enter the PUK code. The Terminal
Management prompts you with the remaining number of attempts for entering the
PIN code or the PUK code.
Unlocking the PIN
When the SIM/USIM card is locked, the
Unlock PIN dialog box is displayed after
you start the Terminal Management.
1. Enter the correct PUK code
2. Enter the new PIN code
3. Click
OK to complete the modification
Choosing a Device
The Terminal Management can support different terminal products.
When the Terminal Management is launched, it searches the matched terminal
automatically. If two or more terminals are found, the connected terminals are
displayed on the Choose Device interface. You can choose a terminal to run and
click OK.
If two or more supported terminals are connected with the PC, you can change or
choose a device when running the Terminal Management.
6