HP 2/8q Fibre Channel - Manual (Page 179)

Command Line Interface
179 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
HISTORY
Displays a history of zoning modifications. This keyword does not require an Admin
session. History information includes the following:
— Time of the most recent zone set activation or deactivation and the user who
performed it
— Time of the most recent modifications to the zoning database and the user who
made them.
— Checksum for the zoning database
LIMITS
Displays the number of zone sets, zones, aliases, members per zone, members per
alias, and total members in the zoning database. This keyword also displays the switch
zoning database limits, excluding the active zone set, which are described in
Table 58 .
This keyword does not require an Admin session.
LIST
Lists all fabric zoning definitions. This keyword does not require an Admin session.
RESTORE
Reverts the changes to the zoning database that have been made during the current
Zoning Edit session since the last
Zoning Save command was entered.
SAVE
Saves changes made during the current Zoning Edit session. The system will inform
you that the zone set must be activated to implement any changes. This does not apply
if you entered the
Zoning Clear command during the Zoning Edit session.
Table 58: Zoning limits
Limit Description
MaxZoneSets Maximum number of zone sets (256).
MaxZones Maximum number of zones (256).
MaxAliases Maximum number of aliases (256).
MaxTotalMembers Maximum number of zone and alias members
(2000) that can be stored in the switch’s
zoning database.
MaxZonesInZoneSets Maximum number of zones that are
components of zone sets (1000), excluding the
orphan zone set, that can be stored in the
switch’s zoning database. Each instance of a
zone in a zone set counts toward this
maximum.
MaxMembersPerZone Maximum number of members in a zone
(2000) that can be stored in the switch’s
zoning database.
MaxMembersPerAlias Maximum number of members in all zones
and aliases (2000)