Husqvarna SG13A - Manual (Page 6)

6
SYMBOLS AND DECALS
Location of decals
Translation of instructions
Decal 3
Important information
Read and make sure you understand the
Operator’s Manual before use or maintenance.
To obtain a replacement manual, please contact
your dealer.
Observe all safety instructions; otherwise you may
injure yourself or others around you.
Make sure that the machine is in serviceable con-
dition prior to use.
Stop the engine and wait until all machine move-
ment comes to a standstill before service, adjust-
ment or cleaning.
Do not run the engine in poorly ventilated spaces.
Make sure nobody is in the vicinity of the machine
before starting and during use.
Avoid slopes that are too steep to use the ma-
chine safely.
Clear any debris prior to use.
Decal 4
Warning
Engine exhaust, some of its constituents and cer-
tain vehicle components contain or emit chemicals
considered by the Sate of California to cause can-
cer, birth defects or other reproductive harm. The
engine emits carbon monoxide, which is a color-
less, poisonous gas. DO NOT use the machine in
enclosed spaces.
Decal 8
O = off, I = on
Decal 9
Rabbit = Fast engage clutch.
Turtle = Slow disengage clutch.
Decal 10
Handle adjustment.
1
2
3
4
5
6
7
8
9
10
11
Decal 5
Wear goggles or safety glasses and ear protec-
tions when using the unit.
Decal 6
There is DANGER to your feet from the cutting
blades.
Decal 11
No step.
12
Decal 12
Sound power rating.