HONDA GXV530 - Manual (Page 12)

10
CONTROLS & FEATURES
FEATURES
Fuel-cut Solenoid
Oil Pressure Switch (applicable engine types)
The engine is equipped with a fuel-cut solenoid that allows fuel to flow
to the carburetor main jet when the engine switch is in the ON or
START position and stops the flow of fuel to the main jet when the
engine switch is in the OFF position.
The engine must be connected to the battery to energize the fuel-cut
solenoid, allowing the engine to run. If the battery is disconnected,
fuel flow to the carburetor main jet will stop.
The engine is equipped with a oil pressure switch to prevent damage
from lack of lubrication or overheating.
If oil pressure alarm lamp comes on, check the engine oil level, and
add the correct engine oil if necessary (see page
).
To restart the engine, turn the engine switch to the OFF position.
Next, start according to the starting procedure.
If the oil pressure alarm lamp continues to light even through the
engine oil level is correct, stop operating the engine and see an
authorized Honda servicing dealers.
22
03/05/14 17:12:19 31Z0A600_011