Heath Zenith DualBrite Motion Sensor Light Control 2LBL3 User Manual

Motion sensor light control, Operation, Operating instructions & parts manual 2lbl3, 2lbl4

Advertising
background image

D

ual

B

rite

®

Motion Sensor

Light Control

Light Control

2 Lamps

(installed)

Cover Plate

Sensor

Lamp Holders

This package includes:

TEST

TEST 1 5 20

ON-TIME

Off 3 6 Dusk to

Dawn

D

ual

B

rite

®

Put ON-TIME switch
on the sensor bottom
to TEST and the D

ual

-

B

rite

®

switch OFF.

OPERATION

* resets to Auto Mode at dawn.

ON-TIME

TEST

1 5 20

... back on.

1 Second OFF

then...

Put the ON-TIME switch in the 1, 5,
or 20 minute position.

Manual mode only works at night
because daylight returns the sensor
to AUTO.

Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.

Manual mode works only with the
ON-TIME switch in the 1, 5, or 20
position.

Note: When first turned on wait about 1

1

/

2

minutes for

the circuitry to calibrate.

Requirements

• The light control requires 120-volts AC.
• If you want to use Manual Mode, the control must be

wired through a switch.

Some codes require installation by a
qualified electrician.

• This product is intended for use with the enclosed

gasket and with a junction box marked for use in wet
locations.

Mode:

On-Time

Works: Day Night

Test

5 Seconds

x

x

Auto

1, 5, or 20 Min

x

Manual

To Dawn*

x

Accent

3, 6 Hr, to Dawn

x

AUTO

MANUAL MODE

Features

• D

ual

Z

one

™ Technology.

• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• D

ual

B

rite

®

Timer.

• Photocell keeps the lighting off during daylight hours.
• LED indicates motion was sensed (day or night).

Plastic Hanger

Rubber Plug

Gasket

6 Screws

(3 sizes included)

Mounting Strap

Mounting Bolt

2 Wire

Connectors

598-1325-00

LPG-5597

®

Operating Instructions & Parts Manual

2LBL3, 2LBL4

HEA 009
Printed in China
09/07

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or main-
tain the product described. Protect yourself and others by observing all safety information. Failure to comply
could result in personal injury and/or property damage! Save these instructions for future reference.

Advertising
This manual is related to the following products: