Before first use, Preparing for use, Filling the water tank – Philips GC3321 User Manual

Page 7: Setting the temperature, Using the appliance, Steam ironing

Advertising
background image

K

Anti-Calc tablet (specific types only)

L

Water tank

Not shown: filling cup

Before first use

1

Remove any sticker, protective foil or plastic from the soleplate (Fig. ).

Preparing for use

Filling the water tank

Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water

tank.

1

Make sure the appliance is unplugged.



Set the steam control to position 0 (= no steam) (Fig. ).



Open the cap of the filling opening.



Tilt the iron backwards and use the filling cup to fill the water tank with tap water up to the

maximum level. (Fig. )

Do not fill the water tank beyond the MAX indication.

5

Close the cap of the filling opening (‘click’).

setting the temperature

1

Put the iron on its heel.



To set the required ironing temperature, turn the temperature dial to the appropriate

position (Fig. 5).

Check the laundry care label for the required ironing temperature:

1

for synthetic fabrics (e.g. acrylic, nylon, polyamide, polyester)

1

for silk

2

for wool

3

for cotton and linen

If you do not know what kind or kinds of fabric an article is made of, determine the right ironing

temperature by ironing a part that is not visible when you wear or use the article.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches. To

prevent stains, do not use the spray function.

Start ironing the articles that require the lowest ironing temperature, such as those made of

synthetic fibres.



Put the mains plug in an earthed wall socket.

The amber temperature light goes on (Fig. 6).



When the temperature light goes out, wait a while before you start ironing.

The temperature light goes on from time to time during ironing.

using the appliance

Note: The iron may give off some smoke when you use it for the first time. This stops after a short while.

steam ironing

1

Make sure that there is enough water in the water tank.



Set the recommended ironing temperature (see chapter ‘Preparing for use’, section ‘Setting

the temperature’).

-

-

-

-

,

EnGlish

7

Advertising
This manual is related to the following products: