Hawking Technology HWU8DD - Manual (Page 26)

26
64,128 or 256 bits you wish to use for your network.
Select a “
Default Key ID ” for your network from the default Key field . Modify
the 4 sets key depending on the selected key length on the field of “ Key Value ”.
Depending on which key mode you choose to enter, “ hexade cimal ” or “ ASCII ”
the key value will change accordingly. For more information regarding
hexadecimal or ASCII keys please contact our Techsupport..
- Select “ Open System ” or “ Shared Key ” mode from the “ authentication Mode ”
drop down menu depending on what type of security you wish to setup in your
network.
1.11 Advanced Settings in AP Mode
- Adjust the fragmentation threshold point by sliding the bar left and right. The
range is from 256 to 2346 (Disable) bytes.
- Adjust the “ RTS / CTS ” settings by sliding the bar left and right. The
threshold point range is from 0 to 2347(Disable) bytes.
- The advanced settings tab allows users to adjust their Preamble to long or short.
If you are an advanced user you may set the value here. Otherwise it is
recommended that you use the default setting.
1.12 MAC Address Filtering in AP Mode
-
MAC Address Filtering - to use MAC address filtering, select the Mac
Address Filter button. The menu page will load as shown in Figure 3-4. Select
“Disable” or “Accept” or “Filter” from the field in the drop down menu “
Filter
Type ”. The MAC Address filtering option supports up to 16 sets of MAC.
When you have finished setting your values, click apply to save your settings.
- Bridge Adapter
- To use the adapter as a Bridge Adapter you must first select the adapter from the
drop down menu.