HTC Surround - Manual (Page 11)

11 BasicsBasics
1. Connect the bigger end of the USB cable to the power adapter.
2. Connect the smaller end of the USB cable to the phone.
3. Plug in the power adapter to an electrical outlet to start charging the battery.
Your phone may turn on when the battery is being charged.
As the battery is being charged, the notification LED shows a solid red light when the
battery is being charged. The light turns to solid green when the phone is fully charged.
When you charge the battery, the charging battery icon is displayed in the status bar
of the Start screen. After the battery has been fully charged, a full battery icon will be
displayed in the status bar of the Start screen.
As a safety precaution, the battery stops charging when it overheats.
Switching your phone on or off
Switching your phone on
Press the POWER button. Easy.
When you turn on the phone for the first time, you’ll need to set it up. Go to “Setting up your phone
for the first time” and we’ll take you through it.
Switching your phone off
1. If the display is off, press the POWER button to turn it back on.
2. Unlock your phone if the Lock screen is displayed. See “Unlocking the screen” in the
Getting started chapter.
3. Press and hold the POWER button until you see the word “Goodbye” onscreen.