HTC Surround - Manual (Page 48)

48 Getting connected Getting connected
Reconnecting a headset or car kit
Normally, you can easily reconnect your headset by switching on Bluetooth on your phone,
and turning on the headset. However, you might have to connect manually if your headset
has been used with another Bluetooth device.
Make sure that the headset is set to discoverable.
On the Start screen, tap .
Tap Settings > Bluetooth.
If the Bluetooth switch is off, tap it to turn on Bluetooth.
Tap the headset’s name in the Bluetooth devices section.
If you’re asked to enter a passcode, try 0000 or 14, or consult the headset/car kit
documentation to find the passcode.
If you still cannot reconnect to the headset or car kit, follow the instructions in “Unpairing
from a Bluetooth device”, and then follow the steps under “Connecting a Bluetooth headset
or car kit”
Disconnecting or unpairing from a Bluetooth device
Disconnecting a Bluetooth device
On the Start screen, tap .
Tap Settings > Bluetooth.
On the list of Bluetooth devices, tap the device to disconnect from it. Tap the device
again on the list to connect to it.
Unpairing from a Bluetooth device
You can make your phone forget its pairing connection with another Bluetooth device.
To connect to the other device again, you may need to enter or reconfirm a passcode.
On the Start screen, tap .
Tap Settings > Bluetooth.
On the list of Bluetooth devices, press and hold the device to unpair.
T ap Delete.
1.
2.
3.
4.
5.
6.
1.
2.
3.
1.
2.
3.
4.