Hawking Technology HNC800PTZ - Manual (Page 13)

2.2 Setup
n
settings of the selected device(s). After clicking on the “Setup” button, the IP Setup Wizard will try to connect to the
elected device(s). If authentication fails, it will prompt a popup dialog (see Figure 2-6) to ask for the correct password
Figure 2-6. Authentication dialog box
2.2.1 System Setting
one of the selected devices, the System Settings page will appear, as shown in Figure 2-7 on the
button to go back to the previous page or main page.
Click on this
Click on this button to discard the settings of the current page and go to the next page.
When you select o e or more devices (of the same model), the “Setup” button will be enabled. Click on it to modify the
s
and HTTP port number. (If you have entered a port number other than the default Port 80, you will need to enter it here.)
After connecting to
following page.
Click on this
button to keep the settings and go to the next page.
13