Hawking Technology HNC800PTZ - Manual (Page 19)

2.3.2 Package Information
he package inform hat you
elected:
Firmware version: The version number of the selected firmware.
Supported script version: The maximum script version that the firmware can support.
Web page version: The version number of the web page.
Script version: Script version used by the web page and server script.
Viewer plug-in version: The version number of the viewer plug-in.
Upgrade plug-in version: The version number of the upgrade plug-in
Supported language: The language that the selected file supports.
.3.3 File Selection
ou can use the file combo list below the Package Information to browse and locate the file that you want to upgrade onto
e selected device(s). After selecting the file, the IP Setup Wizard will check whether or not the file you selected is
rrect. If it is correct, then the Package Information section will display the information about the file and enable the
Upgrade” button. You can then click on the button to upgrade the firmware. If it is not correct, it will prompt a
arning message to appear.
T
ation section will display the following important information about the firmware file t
s
Figure 2-14. Firmware Package/File Info
•
•
•
•
•
•
•
2
Y
th
co
“
w
19