Hisense Group PDP4211EU - Manual (Page 10)

Basic Operations
Understanding the TV features
Power ON/OFF
Signal source selection
POWER
INDICATOR
1. Connect the TV to power outlet, the power indicator will
2. Press the POWER button on the remote control to turn off the TV temporarily.
3. If you decide to shut off the TV for a long time, it is recommended
that you unplug the power from the outlet.
flicker and then
turn blue. About 10 seconds later, TV picture will display on the screen.
Using the TV features
Multimedia - TV receiver, HDTV monitor and PC display, all in one.
Wider viewing angle, 16:9 display - over 160
viewing angle, 16:9 ergonomical display panel
Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective
of magnetic or geomagnetic effect.
Auto tuning function with 200 channels storage
Sleep/wake timer
TELETEXT
NICAM
Dual SCART interface
Multi-language OSD
Press the number [1-9] button or [CH+/CH- ] button to select TV input; press the [VIDEO] button to select Video or
Scart Video1(from SCART 1) or Scart Video 2(from SCART 2) input; press the [S-VIDEO] button to select S-Video
input or Scart S-Video input(from SCART 2) ; press the [ YCbCr] button to select YCbCr input; press the [ YPbPr]
button to select YPbPr input; press the [PC] button to select PC input.
Select channels by [CH+/CH-]
You can also use to select channels. ndicates channel number increase; indicates channel
number decrease.
[ CH+/CH-] + - [CH ] i [CH ]
-8-