Specifications – Herrmidifier Co G-200/300 User Manual

Page 4

Advertising
background image

2

Specifications

To improve the efficiency of your humidifier, and to reduce the possibility of a health hazard, it
is recommended that you take the following precautions:

• Follow the manufacturer’s recommended cleaning and maintenance instructions.

• The amount of minerals and other impurities in a water source can vary greatly, therefore the

frequency of cleaning the humidifier also varies.

• During the heating season, check for film or scale build up on the humidifier, evaporator pad,

and all moving parts on a monthly basis and establish a proper cleaning schedule.

• Do not allow film or scale to build up on the unit, evaporator pad, or any moving part which

will reduce the efficiency of the humidifier.

• An algaecide, such as a humidifier cleaning tablet or bacteriostatic liquid/powder, can be used

to combat algae build-up, should it become evident.

• At the end of the winter humidification season, drain and thoroughly clean your humidifier

as part of the summer shut down. Be sure to install a new evaporator pad at the beginning
of the heating season before starting the humidifier.

Like your heating system and air conditioning unit, periodic maintenance and cleaning are
required to ensure the safe and efficient operation of your humidifier.

Model

Type of Unit

Duct mounting

GPD @ 140°

GPD @ 120°

GPD @ 100°

Input voltage required

Unit W x D x H

Duct Opening W x H

Shipping Weight

Standard Equipment

Features

G-200

Flow thru Bypass

Return Supply

16.1

18.7

12.4

14.4

8.2

9.5

24VAC

11 1/2” x 9 1/2” x 16 1/2”

8 5/8” x 10 3/4”

8.1 lbs

G-300

Flow thru Bypass

Return Supply

20.0

23.3

15.4

18.0

11.0

12.8

24VAC

11 1/2” x 9 1/2” x 19 1/2”

8 5/8” x 13 3/4”

8.4 lbs

Wall/Duct Mount Humidistat

Self Piercing Saddle Valve

24V transformer

Right or left hand discharge

Mounts on 14” minimum wide duct

Bypass: Flexible or hard round duct

Single captive screw secures the cover

All brass solenoid valve assembly

Attractive design & finish, neutral beige color

2” deep evaporator pad for greater surface area

Cleanable & replaceable internal water filter
protects the solenoid valve

Specifications

Advertising