Harbor Freight Tools CHICAGO ELECTRIC 67255 - Manual (Page 10)

Page 10 For technical questions, please call 1-800-444-3353. SKU 67255
speciFicatiOns
Electrical
Input
120 V~ / 60 Hz / 9 A (Rated)
Motor
Speed
5,600 RPM (No Load)
Chain Oil
Type Chain/Bar/Sprocket Oil
Capacity 6 oz (175 ml)
Cutting
Attachment
14” Oregon ® Bar:
Model # 140SDEA041
Sprocket nose
and
Oregon ® Chain:
Model #91PJ052X
Anti-Kickback full skip chain
Pitch: 3/8”
Gauge: 0.050”
# of links: 52
note: This electric chain saw is for cutting
small logs and for lighter weight
trimming jobs. A more powerful chain
saw may be needed for heavy duty
use.
unpacking
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
chain saw Features
Lockout Switch (48)
Trigger Switch
(49)
Power Cord
(52)
Power
Cord
Clip
Bar Oil Cap (19)
Guide
Bar
Nose
Chain Guide Bar (71)
Spiked Bumper
Saw Chain (72)
Front Handle
Guard (30)
Front Handle
(Behind Guard)
Rear
Handle
Drive
Cover
(3)
Figure 1
Bucking - The process of cross 1.
cutting a felled tree or log into
lengths.
Drive Sprocket or Sprocket - The
2.
Toothed part that drives the Saw
Chain.
Felling - The process of cutting down
3.
a tree.
Felling Back Cut - The final cut in a
4.
tree felling operation made on the
opposite side of the tree from the
notching undercut.
Front Handle - The support handle
5.
located at or toward the front of the
Chain Saw.
warning: To avoid possible serious
injury when the Chain Saw is running,
ALWAYS maintain a firm grip with one
hand on the Front Handle and the
other hand on the Rear Handle.