Harbor Freight Tools CHICAGO ELECTRIC 67255 - Manual (Page 11)

Page 11 For technical questions, please call 1-800-444-3353. SKU 67255
Front Handle Guard - A guard that 6.
protects your hand on the Front
Handle from the Saw Chain.
Chain Guide Bar - A solid railed
7.
structure that supports and guides
the Saw Chain.
Kickback - The backward or upward
8.
motion, or both of the Guide Bar,
occurring when the Saw Chain near
the nose of the top area of the Guide
Bar contacts any object such as a log
or branch, or when the wood closes
in and pinches the Saw Chain in the
cut.
Kickback, Pinch - The rapid pushback
9.
of the saw which can occur when
the wood closes in and pinches the
moving saw chain in the cut along the
top of the Guide Bar.
Kickback, Rotational - The rapid
10.
upward and backward motion of
the saw which can occur when the
moving Saw Chain near the upper
portion of the nose of the Guide Bar
contacts an object, such as a log or
branch.
Low-Kickback Chain - A Chain
11.
that complies with the kickback
performance requirements of ANSI
B175.1-1991 when tested on a
representative sample of chain saws.
Lockout Switch - A movable stop that
12.
prevents the unintentional operation
of the Trigger Switch until manually
activated.
Normal Cutting Position - Those
13.
positions assumed in performing the
bucking and felling cuts.
Notching Undercut - A notch cut in a
14.
tree that directs the tree’s fall.
Oiler Control - a System for oiling the 15.
Guide Bar and Saw Chain.
Rear Handle - The support handle
16.
located at or toward the rear of the
saw.
Reduced Kickback Guide Bar
17.
- A Guide Bar which has been
demonstrated to reduce kickback
significantly.
Replacement Saw Chain - A chain
18.
that complies with the kickback
performance requirements of ANSI
B175.1-1991 when tested with
specific chain Saws. It may not meet
the ANSI performance requirements
when used with other saws.
Saw Chain - A loop of chain having
19.
cutting teeth, that cut the wood, and
that is driven by the motor and is
supported by the Guide Bar.
Spiked Bumper (Spike) - The pointed
20.
tooth or teeth for use when felling or
bucking to pivot the saw and maintain
position while sawing.
Trigger Switch - A device that when
21.
operated will complete or interrupt an
electrical power circuit to the motor of
the Chain Saw.