Home Theater Direct MX-500 - Manual (Page 19)

7. Press the MAIN button to exit to main Erase mode.
8. Press the MAIN button once again to exit the SETUP
mode.
C. Erasing Macro Functions
1. Erase M1, M2, M3, POWER and SYSTEM OFF
Buttons
1. Go to the SETUP mode by pressing both the MAIN and
ENTER buttons simultaneously for three seconds.
2. Press the ERASE button next to the LCD screen.
3. Press the MACRO button.
4. If you wish to erase all of the macro buttons in the
MX-500
TM , press the ALL button and then press the SURE?
button at the next LCD screen.
5. If you wish to erase just one of the macros, press the
KEY button at step 4 and then one of the M1, M2, M3,
POWER or SYSTEM OFF buttons to erase the macro
functions from that button.
6. Repeat from Step #5 to erase any other macro buttons
you require.
7. Press the MAIN button to exit to main Erase mode. Press
the MAIN button once again to exit the SETUP mode.
8. Press a single button if you wish to erase individual
buttons one at a time. This will show all the functions in
the device. Press the button you wish to erase.
9. Repeat from Step #5 to erase any other devices or
learned buttons you require.
10. Press the MAIN button to exit to main Erase mode.
Press the MAIN button once again to exit the SETUP
mode.
B. Erasing Favorite Channel Buttons
1. Go to the SETUP mode by pressing both the MAIN and
ENTER buttons simultaneously for three seconds.
2. Press the ERASE button next to the LCD screen.
3. Press the FAV button.
4. If you wish to erase all the favorite channel buttons in
the MX-500
TM , press the ALL button and then press the
SURE? button at the next LCD screen.
5. If you wish to erase one button, press the KEY button.
Press the individual button you want to erase and continue
with any other individual buttons you want to erase.
6. Repeat from Step #5 to erase any favorite channel
buttons you require.
8. Erasing Existing Programming 8. Erasing Existing Programming
36 35