HANNspree 22" Liquid Crystal Display monitor XM - Manual (Page 10)

9
First Setup
Congratulation for purchasing this monitor of high performance!
This monitor comes with the following accessories :
zPower cable
zD-Sub cable (15 pin)
zAudio cable
z
z
Quick Installation
1. Connect video cable (D-Sub cable)
Make sure both monitor and computer are powered OFF. Connect the video
cable (D-Sub cable) to the computer, then to the monitor.
2. Connect HDMI cable(Not supplied)
Connect the HDMI cable from HDMI output of computer to the HDMI input of
the monitor.
3. Connect power cord
Connect the power cord to a properly grounded AC outlet, then to the monitor.
4. Power-ON computer and monitor
Power-ON the computer, then Power-ON the monitor.
5. Windows users: Setting the Timing Mode (Resolution and Refresh Rate)
Example: 1680 x 1050 @ 60 Hz
Resolution Right-click on the Windows desktop > Properties > Settings > “Desktop
Area”. Set the resolution.
Refresh Rate (vertical frequency) See your graphic card’s user guide for instructions.
Example:
Power cable
z
z
Warranty and Service Manual
CD ROM (including User’s manual)
HDMI Cable (Optional)
DVI-D/HDMI Cable (Optional)
HDMI Cable (Optional)