HANNspree 22" Liquid Crystal Display monitor XM - Manual (Page 17)

16
Care and Maintenance
Care
zAvoid exposing your monitor directly to sunlight or other heat source. Place your
monitor away from the sun to reduce glare.
zPut your monitor in a well ventilated area.
zDo not place any heavy things on top of your monitor.
zMake certain your monitor is installed in a clean and moisture-free area.
zKeep your monitor away from magnets, motors, transformers, speakers, and TV
sets.
Safety Tips
zIf smoke, abnormal noise or odor came out from your monitor, caution you
should remove the power cord immediately and call your service center.
zNever remove the rear cover of your monitor cabinet. The display unit inside
contains high-voltage parts and may cause electric shock to human bodies.
zNever try to repair your monitor yourself. Always call your service center or a
TXDOL¿HGWHFKQLFLDQWR¿[LW
Troubleshooting
No power
zMake sure A/C power cord is securely connected to the power adapter and the
SRZHUVXSSO\LV¿UPO\FRQQHFWHGWRWKHPRQLWRU
zPlug another electrical device into the power outlet to verify that the outlet is
supplying proper voltage.
zMake sure all signal cables are installed.
Power on but no screen image
zMake sure the video cable supplied with the monitor is tightly secured to the
video output port on back of the computer. If not, tightly secure it.
zAdjust brightness.
Wrong or abnormal colors
zIf any colors (red, green, blue) are missing, check the video cable to make sure
it is securely connected. Loose or broken pins in the cable connector could
cause an improper connection.
zConnect the monitor to another computer.
According to WEEE regulation , this monitor can’t be handled as
normal trash in Europe when it is out of usage. Please refer to
the recycle information from our website to handle it.