haier GDZ22-2 - Manual (Page 12)

Other Features
2. Press "Timed/Cycles" button and select "Rack Dry" cycle
1. Press "Power On/Off" button to power on
After powering on, press "Timed/Cycle" button to select "Rack Dry" program.
3. Press "More Time" And "Less Time" buttons to set a suitable time
After setting "Timed/Cycle" to "Rack Dry" , you can press these two buttons to
increase or decrease drying time as you desires.
4-7. Press buttons "Temp", "Cycle Signal", "Delay Start", and "Wrinkle
Care" to define your desired program
Notes: For "Rack Dry" program, use of buttons "Temp", "Cycle Signal", "Delay
Start" and "Wrinkle Care" is the same as for auto-programs. "Dryness Level" is
here inactive, pressing of which will get alarms.
8. Press "Start/Pause" button
11
Your dryer also has the following features for your convenience:
Lint Filter:
All dryers come with a lint filter that needs to be cleaned before or after
every Use ( read Care and Cleaning Guide Section).
Leveling Legs:
Your dryer has four leveling legs which are located in the front and rear
corners of your dryer. After installingyour dryer in its final position,
you can level your dryer.
Leveling legs can be adjusted by turning them clockwise to raise your
dryer or by turning them counterclockwise to lower your dr yer.