Hitachi DZ-MV780A - Manual (Page 106)

English
106
SELECTING MULTIPLE SCENES
1
Press the DISC NAVIGATION button.
2
Use the f/e/d/c buttons to select
the desired scene.
3
Press the SELECT button once:
The selected scene will be framed in red and
yellow.
Repeat steps 2 and 3 to randomly select
multiple scenes.
SELECTING CONSECUTIVE SCENES TOGETHER
1
Press the DISC NAVIGATION button.
2
Use the f/e/d/
c buttons to select the
desired scene.
3
Hold down the
SELECT button for at
least one second:
The selected scene will
be doubly framed in
yellow and blue.
4
Use the f/e/d/
c buttons to select the
last scene in the range
you want, and then
press the A button:
The thumbnails of
scenes in the specified
range will be framed in
red, and then selected.
Note :
• You can know the status of scenes from the colors of
cursor and bargraph:
• Pressing the A button after selecting scenes will
play back only the selected scenes from the
beginning of each.
• To cancel a selected scene, select the scene to be
canceled, and then press the SELECT button.
To cancel all selected scenes, press the
C button.
• You can also select scenes in reverse from the last
scene in the range.
• To release multiple selection, press the C or SELECT
button before pressing the A button in step 4.
• Up to 999 scenes can be selected for both disc and
card.
005 / 014 A l l Pr ogr ams
PLAY RAM
Yellow frame
005 / 014 A l l Pr ogr ams
RAM ENTER CANCEL
Double frames in
yellow and blue
010/ 014 A l l Pr ogr ams
RAM PLAY DESELECT ALL
When scenes up to
this point are selected
Red
frame
Cursor Bar graph Status of scenes
Yellow Light blue Current cursor position
Blue Light blue
Range of scenes being
selected
Red Red Scenes already selected