Hitachi DZ-MV780A - Manual (Page 97)

English
97
123
SETTING ON-SCREEN DISPLAY OUTPUT ON OR OFF (OSD OUTPUT)
If you connect this DVD video camera/recorder to a TV to view images on TV screen, you can
switch off the on-screen information (displayed in the viewfinder or on the LCD screen) from the TV
screen.
1
Press the MENU
button, use “Operating
Menu” (p. 64) to choose
“OSD Output” on the
“Record Functions
Setup” menu screen,
and then press the A
button.
2
Choose “On” or “Off”, and press the A
button.
3
Press the MENU button to end the setting.
Note
:
• The “OSD Output” setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
• Even if “Off” is chosen, the on-screen information will
appear during playback. See page 62 for playback on-
screen information display.
• Even after the on-screen information is removed from
the TV screen, it will still appear in the viewfinder or
on the LCD screen.
• The on-screen display output functions only when the
input selection is set to camera: It cannot be set
during external input.
RAM ENTER RETURN
On
O f f
OSD Ou t p u t
I n p u t Sou r ce
Re c o r d F u n c t i o n s S e t u p
V I DEO Mode
1 6 : 9
3 0 MIN
0 : 0 0 : 0 0
REM
FINE
8 : 0 0 AM
9 / 3 0 / 2 0 0 5
3 0 MIN
0 : 0 0 : 0 0
REM
FINE
8 : 0 0 AM
9 / 3 0 / 2 0 0 5
LCD screen or viewfinder
“On” setting “Off” setting
TV screen TV screen