Hyster H40.00-50.00XM-16CH - Manual (Page 11)

Service Access
›
Engine and transmission check points are directly
accessible via two top covers.
›
Engine, transmission and hydraulic components are easily
accessible by lifting off the aluminium top covers.
›
Large compartments doors and openings are situated on
both sides of the machine.
Optional Equipment
›
2-High stacking configuration:
Equipped with min. 4270 mm BOF
lift height mast (lowered height 5106 mm).
Fitted with a 650 mm lower cab position
(to enable clear through mast visibility
underneath a 2-high raised 9’6” high container).
Includes tilting cab for service access.
›
Special paint (RAL) colour(s).
›
Smaller sized 16.00 x 25 rear wheels.
›
Radial type tyres.
›
Central greasing system, on truck and spreader.
Operator convenience / cab options:
›
Mast tilt indicator (mechanical).
›
Air suspension seat.
›
Without air-conditioning, but with sunshade screens
on top and rear window.
Spreader options:
›
Half-high mounted dedicated carriage & spreader, to
also handle 4’ and 4’3” half-height containers. A mast
with min. 1.22 m more lift height is selected to keep
the same total maximum container stacking height.
›
Extra Load Distance of 127mm on a high-mounted
dedicated carriage & spreader. The extra distance
may facilitate easier handling from/on wide railway
wagons.
›
30’ Automatic stop, required for handling (a)
30’ container(s).
›
4 Extra lifting eyes underneath the centre of the
spreader. (Note: 4 corner lifting eyes are standard)
11
11/12