Hyster H40.00-50.00XM-16CH - Manual (Page 7)

07
Engine
›
Cummins QSM 11 6-cylinder diesel engine
conforming to EU Tier 3 exhaust emission
requirements for NRMM (Non-Road Mobile
Machinery).
›
Turbo-intercooler engine delivering 224 kW (300 Hp)
at 1800 - 2100 rpm.
›
Very smooth torque characteristic, with max.
1424 Nm between 1000-1400 rpm, resulting in
excellent lifting and acceleration power, combined
with low fuel consumption.
›
Engine protection system, with shutdown function on
high coolant temperature and/or low oil pressure.
›
Heavy-duty air cleaner, with two-stage filter plus a
cyclonic pre-cleaner, suitable for dusty operating
environments.
›
Cooling system suitable up to 50°C ambient.
›
Fuel Tank: 700 litres.
Transmission
›
The S.O.H. model TE-27 powershift transmission has
fully automatic ‘APC200’ soft-shift 4-speed gear
change and an electronic ‘inching’ function, plus a
protective lock-out, to help prevent forward to reverse
shifting while on the move.
›
Back-up alarm sounds when in reverse gear.
Axles
›
Drive axle with double reduction and one-piece
drive shafts, with multiple wet disc brakes with
cooling system.
Brakes
›
Service brakes: Oil cooled, multiple wet disc brakes
on the front wheels, hydraulically charged by
accumulator, with cooling system.
›
Parking brake: Spring actuated and hydraulically
released, acting on the drive shaft. Parking brake is
automatically applied when hydraulic pressure falls
below 100 bar.
›
Steer axle with single steering cylinder and non-
adjustable tie-rods. Wheel nut protection.
›
18.00 x 25 wheels fitted all-round.
Drivetrain
7/12