Harbor Freight Tools 94683 User Manual
Page 8
UNPACKING
When unpacking, check to make sure all the parts shown in the Parts List on page 12
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the front cover of this manual as soon as possible.
PRE-OPERATING INSTRUCTIONS
To Charge The Internal Battery:
1.
The Battery for the Bug Vacuum must be fully charged before using the tool.
When charging for the
first
time, and all subsequent charges, the charge time is
14 to 16 hours. Never charge the Battery for longer than 16 hours, as damage to
the Battery and/or Vacuum will occur. Approximate 20 minute run time when fully
charged.
SYMBOLOGY
FIGURE D
2.
To charge the Battery, turn the Power Switch to its “OFF” position.
3.
Insert the Charging Plug of the Charger (6) into the Charging Receptacle of the
Vacuum (1). (See Figure E, next page.)
4.
Plug the Power Cord Plug of the Charger (6) into the nearest, 120 volt,
grounded, electrical outlet. The RED LED light on the Charger will illuminate,
indicating the Battery is being charged. (See Figure E.)
5.
Charge the Battery for 14 to 16 hours. IMPORTANT: The Charger (6)
will not
SKU 94683 For technical questions, please call 1-800-444-3353 PAGE 8