Harbor Freight Tools 2433 - Manual (Page 13)

SKU 02433 PAGE 13
For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
REV 08/04; 10/04
5. The Turbo Wand (33C) features a fixed Nozzle which increases the Pressure
Washer’s effectiveness and decreases its cleaning area, and is recommended
for heavy duty cleaning of small areas.
The spray pattern on the Turbo Wand is
not adjustable, but provides a circular water pattern as it sprays the high pressure
water. The Turbo wand must only be used on areas that cannot be cleaned with the
normal nozzle and are resilient enough to withstand the increased pressure involved.
(See Figure K.)
6. The built-in Detergent Dispenser
located in the Handle (1A) allows
the application (USING THE BRUSH
WAND OR SPRAY WAND LOW
PRESSURE SETTING ONLY) of
pressure washing detergent (not
included) onto the work surface.
When filling the Detergent Dispenser
with
pressure washing detergent , do
not exceed 3 quarts of detergent. The
Pressure Washer will automatically
mix the detergent and water. Note:
Detergent is dispensed in a 6%
solution. Do not add water to the
Detergent Dispenser.
CAUTION! NEVER use any products
not designed for pressure washer use,
nor any products with bleach, chlorine,
or any other corrosive materials,
including liquids containing solvents,
trisodium phosphate products,
ammonia, or acid-based cleaners.
Fill the Detergent Dispenser
only when the unit is not running or plugged in.
(See Figure L.)
SPRAY WAND
(9C)
NOZZLE
FIGURE J - ADJUSTMENTS
Pressure Adjustment
FIGURE L
HANDLE
(1A)
DETERGENT DISPENSER FILL CAP
TURBO WAND
(33C)
FIGURE K
Pattern Adjustment