Harbor Freight Tools 2433 - Manual (Page 24)

SKU 02433 PAGE 24 For technical questions, please call 1-800-444-3353.
If the steps above do not solve the problem or if the repairs involved are too
complex, contact a qualified technician.
IMPORTANT!
Be CERTAIN to shut off the Pressure Washer, release all pressure in a safe manner, and
disconnect it from power and water before adjusting, cleaning, or repairing the unit.
TROUBLESHOOTING (CONTINUED)
PRESSURE CHANGES DURING USE
Air may be getting in the water supply
hose, check all connections.
Retighten
connections.
Check that tip is free from
debris and deposits.
ALL CONNECTIONS
ARE TIGHT
CONNECTIONS
ARE LOOSE
TIP IS
CLEAN
TIP IS
DIRTY
Clean tip, using the
included Tip Cleaning
wire. Internal valves or seals may
be worn or sticking, contact
a qualified technician.
DETERGENT WILL NOT DISPENSE
Verify that proper type of pressure
washer detergent is being used, and
that the appropriate wands/settings are
being used, see page 13, #6.
NON-PRESSURE
WASHER DETERGENT
USED
Remove the Handle
(1A) and thoroughly
rinse out the detergent
bottle and passages.
Refill with correct
detergent.
CORRECT DETERGENT,
WANDS, AND SETTINGS
USED
INCORRECT WANDS/
SETTINGS USED
Set up the washer as
explained on page 13. Remove the Handle (1A)
and check that the suction
tube is not bent or pinched.