Harbor Freight Tools 98059 - Manual (Page 2)

Page 2 SKU 98059 For technical questions, please call 1-800-444-3353.
Specifications
Electrical
Requirements
Input: 120 VAC~ / 60 Hz
Output: 9 VDC @ 500mA
Battery Type: 6V4ah/20HR
Battery Charge Time: 8 ~ 10 Hours
Adapter Plug: 2 Prong, Grounded
Power Switch: ON/Off Rocker Switch
Maximum
Weight
Capacity
33 Pounds (15 Kilograms)
Minimum
Weight
7 ounces/200 grams
Control
Panel Button
Indicators
Yellow Push Button = Lb. or Kg.
Blue Push Button = Tare
Blue Push Button = Zero
Red LED
Indicators
T = Tare / Z = Zero
LB = Pound / KG = Kilogram
AC = AC Powered
Additional
Features
Four Plastic Feet for Leveling of
Scale
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not
cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Save This Manual
Keep this manual for the safety warnings
and precautions, assembly, operating, inspection,
maintenance and cleaning procedures. Write the
product’s serial number in the back of the manual near
the assembly diagram (or month and year of purchase
if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
Important Safety Information
In this manual, on the labeling, and all other
information provided with this product:
This is the safety alert symbol. It is
used to alert you to potential
personal injury hazards. Obey all
safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE is used to address practices
not related to personal injury.
CAUTION, without the safety alert symbol, is used
to address practices not related to personal injury.
General Power Tool
Safety Warnings
WARNING Read all safety warnings and
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future
reference.
The term ″Scale″ in the warnings refers
to your battery-operated (cordless)
Bench Top Digital Scale.
1. Work area safety
a. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b. Do not operate the Scale in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Battery operated equipment create sparks
which may ignite the dust or fumes.
2. Electrical safety
a. The AC/DC Adapter plug must match the
outlet. Never modify the plug in any way. Do
not use any additional adapter plugs with
the Scale. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b. Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is grounded.
c. Do not expose the Scale to rain or wet
conditions. Water entering the Scale will
increase the risk of electric shock.
d. Do not abuse the AC/DC Adapter Cord.
Never use the Cord for carrying, pulling
or unplugging the AC/DC Adapter. Keep
the Cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled
Cords increase the risk of electric shock.
e. When operating the Scale outdoors, use
an extension cord suitable for outdoor