Inspection, maintenance, and cleaning – Harbor Freight Tools 98059 User Manual
Page 8
Page 8
SKU 98059
For technical questions, please call 1-800-444-3353.
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the Scale to its “OFF” position and unplug the unit’s AC/DC
Adapter from its electrical outlet before performing any inspection, maintenance, or
cleaning procedures.
TO PREVENT SERIOUS INJURY FROM EQUIPMENT FAILURE:
Do not use damaged equipment. If abnormal noise or erratic values
are shown, have the problem corrected before further use.
Inspection, Maintenance, and Cleaning
1.
BEFORE EACH USE, inspect the general condition of the Scale.
2.
BATTERY REPLACEMENT: A Battery that fails to accept a charge is an indication the Battery
should be replaced. To replace the Battery requires the use of a soldering tool and specific
soldering expertise. It is recommended that only a qualified service technician perform a Battery
replacement procedure. Note: Battery must be fully discharged prior to any soldering.
3.
AFTER USE, clean all external surfaces of the Scale with a soft, clean
cloth. Do not use solvents. Do not immerse the Scale in liquid.
4.
WARNING! If the Cord of the AC/DC Adapter is damaged, it must
be replaced only by a qualified service technician.