Husqvarna 540200800 - Manual (Page 9)

9
3. Attaching the Heat Shield
Tools Required:
1/2” Wrench
1/2” Socket
Ratchet
1. Locate two (2) holes in top corner brace plates of
Hitch.
2. Aligning holes in bottom of Heat Shield, place Heat
Shield onto Hitch.
3. Secure Heat Shield to Hitch using two (2) 5/16”-18
x 1” hex bolts, four (4) 5/16” flat washers, and two
(2) 5/16” nylon lock nuts.
Operators Guide
Assembly Instructions (continued)
Hitch
Heat
Shield
If installing a spindle drive assembly, skip to step 5.