Harbor Freight Tools 66399 - Manual (Page 8)

Page 8 For technical questions, please call 1-800-444-3353. SKU 66399
storage bag for inflator nozzles that is
attached to the Rubber Hose.
18. Store in a dry location.
USER-MAINTENANCE
INSTRUCTIONS
Procedures not specifically
explained in this manual must
be performed only by a qualified
technician.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION: Turn off the tool,
detach the Power supply clamps,
safely discharge any residual air
pressure in the tool, and release
the throttle and/or turn the switch
to its off position before
performing any inspection,
maintenance, or cleaning
procedures.
TO PREVENT SERIOUS INJURY
FROM TOOL FAILURE: Do not
use damaged equipment. If
abnormal noise, vibration, or
leaking air occurs, have the
problem corrected before further
use.
Cleaning, Maintenance and
Lubrication
Note: These procedures are in addition to
the regular checks and maintenance
explained as part of the regular operation
of the Air Compressor.
1. Wipe down the compressor with a clean
dry cloth.
2. Check the hoses to be sure there are no
cracks or worn areas.
3. Rotate Filter counterclockwise and
remove from the compressor. Gently
pry the cover from the threaded end.
Remove the filter, wash in warm water
REV 10a