Recording and playback, 1 instant recording – Humax PVR-9200T User Manual

Page 32

Advertising
background image

**

Using the built-in hard disk drive, you can record a programme without an external media device such as a VCR.

**

6.1 Instant Recording

Press the RECORD

button on the remote controller to record the current programme instantly. The product will

record the live broadcast feed, so if you are watching a time-delayed recording, the recorder will not save what you are
currently watching. If you change channels while recording and press the RECORD

button, recording starts. You

can record up to two channels simultaneously. While recording two channels simultaneously, you cannot perform
TSR(Time Shifted Recording), however, programmes on air can be viewed.

Press the STOP

button to stop the recording while you record

two other channels. Then you will be prompted to select one among the
recording channels.

Press the RECORD

button again to record another channel while

you record two other channels. Then you will be prompted to select one
to stop for new recording.

Notice:

Ensure that there is enough free space before recording. If the free space on the hard disk drive is insufficient,
recording will stop. Recording one hour of programme may require up to 2 or 3GB of hard disk space. The space
for recording 1 hour of programme may be different depending on the programme recorded.

You can record radio programmes also.

6. Recording and Playback

GB 31

Advertising