Humax PVR-9200T - Manual (Page 65)

**
10.3 Default Setting
Default Setting restores the product to the default settings.
Warning: Please note that once you perform Default Setting, all data such as Channel List and User Configured
data are deleted, no information on the HDD will be lost.
**
To perform Factory Default:
1. Press the MENU button.
2. Select Installation using the button and press the OK or button.
3. Enter Password using the NUMERICAL (0-9) button.
4. Select Default Setting using the button, press the OK or button.
5. Select Yes and press the OK button to restore all setting to Factory Default.
Select No and press the OK or BACK button to return to the previous menu.
6. Confirm again to start loading default setting. Enter Password using the NUMERICAL (0-9) button to perform
restoring.
7. When completing the default setting, press the OK button to automatically run the Installation Wizard.
For detailed information about Installation Wizard, refer to 3. Installation Wizard.
Note: The default password is 0000.
10. Installation
GB 64