Hand Held Products IT4800 - Manual (Page 25)

2 - 1
2
Quick*View
Quick*View Demonstration Software Instructions
Quick*View is a Microsoft Windows
®
program that displays decoded symbol
messages and captures images (for instance, ID photographs) from the imager.
Bar code information and images are displayed in the Quick*View window.
Note: For additional information about Quick*View, please refer to the user’s
guide for your imager.
Setting Up the Imager and the Quick*View Software
1. Connect the Imager to the PC’s com port (com port 1 or com port 2) via the
appropriate interface cable (refer to the user’s guide for your imager). Con-
nect the appropriate power supply to the Imager. (The Imager cannot get its
power from the PC’s com port.)
2. Insert the SDK CD. Load Quick*View from the CD.
For Microsoft Windows 95 or NT 4.0
3. Insert the Quick*View diskette labelled “32 Bit Release” into Drive A or B.
4. From the Start Menu, click on Run. Type “x:\setup” in the command line
box, where “x” represents a drive letter, typically “A” for the 3.5" floppy drive
on most PCs. Click on OK.
5. Follow the instructions in the setup screens.
6. To start the Quick*View program, from the Start Menu click on Programs,
Quickview, QuickView (32 Bit).
Installing Quick*View from the Web
1. Access the HHP web site at www.hhp.com.
2. Click in the Quick Search text box and enter Quick*View.
3. Click on Search Now.
4. Click on the entry for Quick*View.
5. When prompted, select Save File, and save the files to the c:\win-
dows\temp directory.
6. Once you have finished downloading the file, exit the web site.
7. Using Explorer, go to the c:\windows\temp file.