Humminbird 1157C - Manual (Page 172)

NOTE: When the readout under the water column is turned off (as shown in the illustrations), the sonar display
will expand to fill the screen.
To Select Readouts:
1. Make sure you are in Advanced User Mode, then highlight Select Readouts on the Setup main
menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.
3. The Select Readouts submenu will appear, showing a list of all Readouts. Use the UP or DOWN
Cursor keys to select a particular Readout position, then use the RIGHT or LEFT Cursor keys to
change what will be displayed at that position. (Aux. Temperature, Course, Depth, Off, Position,
Speed, Temperature, Time, Time+Date, Triplog, Voltage, Water Speed)
Default Sonar View
Custom Sonar View
162