Storage – Harbor Freight Tools Predator Generator 69728 User Manual

Page 17

Advertising
background image

Item 69728 / 69729

Page 17

For Pump technical questions, please call 1-800-444-3353.

For engine technical questions, please call 1-800-520-0882.

Sa

Fet

Y

O

Pe

R

ati

O

n

m

aintenan

C

e

Setu

P

Storage

When the equipment is to remain idle for longer than

20 days, prepare the engine for storage as follows:

1.

CleaninG:

Wait for engine to cool, then clean engine with

dry cloth.

nOtiCe: Do not clean using water.

The water will gradually enter the engine and cause

rust damage.

Apply a thin coat of rust preventive

oil to all metal parts.

2.

Fuel:

WaRninG! tO PRevent SeRiOuS

injuRY FROm FiRe:

Drain the fuel tank in a well-ventilated area

away from ignition sources. If the engine is

hot from use, shut the engine off and wait

for it to cool before draining fuel.

Do not smoke.

a.

Drain Plug

air Filter assembly

Cylinder

assembly

Place a funnel leading to a proper gasoline

container below the carburetor.

b. Remove the drain bolt from the bottom of the

carburetor bowl and allow the fuel to drain.

If present on your model, remove the small

sediment cup next to the bowl and allow

the fuel to drain from there as well.

c. Open the fuel valve. After all fuel has

drained, reinstall the drain bolt and sediment

cup (if equipped). Tighten securely.

3.

luBRiCatiOn:
a. Change engine oil.
b. Clean out area around spark plug. Remove

spark plug and pour one tablespoon of engine

oil into cylinder through spark plug hole.

c. Replace spark plug, but leave spark

plug cap disconnected.

d. Pull Starter Handle to distribute oil in cylinder.

Stop after one or two revolutions when you

feel the piston start the compression stroke

(when you start to feel resistance).

4.

BatteRY:

Disconnect battery cables (if equipped).

Recharge batteries monthly while in storage.

5.

StORaGe aRea:

Cover and store in a dry, level, well-ventilated

area out of reach of children. Storage area

should also be away from ignition sources, such

as water heaters, clothes dryers, and furnaces.

6.

aFteR StORaGe:

Before starting the engine after storage, keep in

mind that untreated gasoline will deteriorate quickly.

Drain the fuel tank and change to fresh fuel

if untreated gasoline has been sitting for

a month, if treated gasoline has been sitting

beyond the fuel stabilizer’s recommended

time period, or if the engine does not start.

Advertising
This manual is related to the following products: