Operating instructions (continued), Input selection, Volume adjustment – Hitachi Koki USA CMP4120HDUS User Manual

Page 19: Sound mute, English

Advertising
background image

■ While the on-screen display system, EasyMenu ( ) is not on display, press the

remote controller VOLUME button or (or the main unit VOLUME button
▲ or ▼ to adjust the sound volume.

• The adjustment status will be displayed as

guidance while you press these buttons.

While the guidance is on display, press
or ▲ to turn up the volume.

While the guidance is on display, press
or ▼ to turn down the volume.

• You can also adjust the sound volume setting

via the on-screen display system, EasyMenu

.

• The sound volume adjustment mode will exit when no keys are entered for 5 seconds. (The

adjustment status guidance will disappear automatically.)

ENGLISH

10

OPERATING INSTRUCTIONS (continued)

VOLUME

Main unit

Remote

controller

VOLUME

■ Press the RGB/VIDEO button on the remote controller or the INPUT SELECT

button on the main unit to switch the input in the sequence of RGB1 -> RGB2 ->
VIDEO1 -> VIDEO2 -> RGB1.

• When the same signal is input to RGB1 and

RGB2, the phase may in some cases shift
slightly but this is not a malfunction. In such
case, readjust the PHASE of the one being
used.

RGB1

(D-sub input)

RGB2

(BNC input)

VIDEO1 (composite or S input)

VIDEO2

(COMPONENT input)

Input Selection

RGB/
VIDEO

Remote

controller

INPUT

SELECT

Main unit

Volume Adjustment

12

14

VOLUME

: 30

Sound volume setting

Adjustment status guidance

■ Press the remote controller MUTE button to mute the sound temporarily.

• When you press the button, [MUTE] (pink) and the

status of volume setting will be displayed in a
guidance image.

• While the sound is muted, press the button to

turn down the volume.

• While the sound is muted, press the button to

cancel the mute.

• You can also adjust the sound volume setting of the

mute via the on-screen display system, EasyMenu

.

■ Press the remote controller MUTE button once again and the mute will be canceled and

the guidance will change to VOLUME (blue), enabling the volume to be heard.

• When MUTE is used, the guide display will continue for 5 sec. and then turn off.

Sound Mute

MUTE

Remote

controller

MUTE

: 30

Sound volume setting

(The display will turn to pink.)

14

Advertising