Holux GPSmile51B - Manual (Page 18)

-10- GPSmile51
Getting Started
If you are a first-time system user, the following explanations will help
you quickly understand the system operations, and experience the
system’s powerful and convenient functions.
1. Battery installation
This system uses a proprietary Lithium battery, charge after
installation. For details please refer to page 12 in this manual.
2. SD memory card installation
The system included memory card contains the digital map files
and important data for GPS navigation. Install first and refer to
page 20 in this manual.
3. Using the stylus
The stylus is the main tool for operating this unit and is concealed
in a pen slot at the rear. Pull out to use. For details please refer to
page 19 in this manual.
4. Initial GPS positioning
Perform GPS positioning at an outdoor open location. Press the
power switch and select [GPS] to enter the navigational screen.
Select [Menu] for the control menus and then select [GPS status]
to enter the GPS positioning screen. The system will automatically
search for a satellite signal and begin the positioning procedure.
After GPS positioning is complete, a GPS satellite status icon will
appear onscreen and related data will be displayed. For details
please refer to page 5 “Navigation software manual”.
5. Voice settings
Sets the language type. Startup > select [GPS] > press [Menu] key
> enter the control menu > select [Navigation setting] > at
[Language selection] select the arrows on both sides to switch
between Chinese and English. For details please refer to page 58
“Navigation software manual”.