Holux GPSmile51B - Manual (Page 32)

-24- GPSmile51
[Stylus Adjustment]
Control of the unit is accomplished primarily through the stylus by
touching/writing on the screen. If the system cannot correctly identify
your stylus’ input, please run through the screen calibration procedure.
1. From the settings window, select [Stylus Adjustment] to start the
screen calibration procedure.
2. Use the stylus and touch the cross at the center of the screen once.
3. Touch the cross in the second position once.
4. Touch the cross in the third position once.
5. Continue the calibration by touching the cross in the positions that
follow