Harman-Kardon HD720 - Manual (Page 9)

Rear Panel Connections
6
DIGITAL
OUTPUT OUTPUT
COAXIAL
FIXED
LEFT
RIGHT
REMOTE
IN OUT
ON OFF
AUTOPLAY
MODEL NO.: HD720
HARMAN KARDON
WOODBURY
NEW YORK
SERIAL NO.
MADE IN CHINA
MANUFACTURED
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
C A U T I O N
RISK OF ELECTRIC SHOCK DO NOT OPEN
AC 120V ~ 60 Hz 12 W
¡ ™ £ ¢ ∞ §
¡ Coaxial Digital Output
™ Fixed Audio Outputs
£ Autoplay Switch
¢ Remote Control Input
∞ Remote Control Output
§ AC Power Cord
¡ Coaxial Digital Output: Connect
this jack to the coaxial digital input of
an external digital-to-analog converter
for direct access to the digital signals
of the HD720. DO NOT connect this
jack to the standard audio inputs of
any device.
™ Fixed Audio Outputs: Connect
these jacks to the CD audio inputs
of your receiver, surround processor
or preamplifier.
£ Autoplay Switch: When this
switch is in the “ON” position, the
HD720 will automatically go into the
Play mode whenever the power is
turned on and a disc is in the CD
drawer. To disable the Autoplay func-
tion, put the switch in the OFF position.
(See page 14 for more information.)
¢ Remote Control Input:
Connect the output of a remote
infrared sensor or the remote control
output of another compatible
Harman Kardon product. This will
enable the remote control system to
operate even when the front panel
Remote Sensor 3 is blocked. It will
also allow use of the HD720 with
optional, external control systems.
∞ Remote Control Output:
Connect this jack to the input of
another compatible Harman Kardon
remote controlled device to have the
remote sensor on the HD720 provide
signals to other products.
§ AC Power Cord: Connect this
plug to an AC outlet. If the outlet is
switch controlled, make certain that
the switch is in the ON position.
HD720 –120V Owner's Manual 9/17/98 9:54 AM Page 6