HP PhotoSmart M22 - Manual (Page 155)

155 Managing Batteries
Recharging NiMH Batteries
NiMH batteries can be recharged in the camera when the
camera is connected to an optional HP AC power adapter
or HP Photosmart M-series dock. NiMH batteries can also be
recharged with the optional HP Photosmart battery quick
recharger. For information about these optional accessories,
see Appendix B, Purchasing Camera Accessories, starting on
page159.
The following table shows the average time it takes to
recharge NiMH batteries that have been fully discharged,
depending on where the batteries are being charged. The
table also notes the signal you will see when the batteries
have been recharged.
Where batteries
are charged
Average
charge time
Signal when charging has
completed
In camera with
HP AC power
adapter
connected
12 to15
hours
If the camera is off, the Power/
Memory light on the camera
stops blinking and turns off. If the
camera is on with the Image
Display on, the icon
appears.
In camera while
camera is in the
dock
12 to15
hours
Power light on the dock stops
blinking and turns on solid.
In HP quick
recharger
1 hour for 2
batteries.
About 2
hours for 4
batteries
Light on quick recharger turns on
solid green.