HP PhotoSmart M22 - Manual (Page 45)

45 Taking Pictures and Recording Video Clips
Taking a Panoramic Sequence of Pictures
1. Press the MODE button until the
Panorama mode appears
in the Image Display. You are
now ready to take the first
picture in your panoramic
sequence.
TIP: Panorama images are stitched
together from left to right, so make sure your first image is
at the left-most end of the panorama view.
2. Press the Shutter button to take
the first picture in the panoramic
sequence. After Instant Review,
the camera switches to Live View
with displayed in the Image
Display.
3. Position the camera to take the
second picture. Notice the transparent overlay of the
image of the first picture in the sequence superimposed
on the left third of the Live View screen. Use this overlay to
align your second picture horizontally with the first.
4. Press the Shutter button to take
the second picture. After Instant
Review, the camera switches to
Live View with displayed in
the Image Display. Again, the
transparent overlay of the
previous image is superimposed
on the left third of the Live View screen to enable you to
align your third picture.