HP PhotoSmart M22 - Manual (Page 12)

12 HP Photosmart M22/M23 User’s Manual
2. Install the Batteries
1. Open the Battery/Memory card door on
the side of the camera by sliding the
door toward the front of the camera.
2. Insert the batteries as indicated inside
the door.
3. Close the Battery/Memory card door by
pushing the door down and sliding the
door toward the back of the camera until
the door latches.
For the performance of NiMH, Lithium, and
Alkaline batteries when used with this camera, see
Performance per Battery Type on page 152. For the number
of shots you can expect to get for each battery type based
on usage, see Number of Shots per Battery Type on
page 153. For hints on optimizing battery performance, see
Appendix A, Managing Batteries, starting on page 149.
TIP: You can also use an optional HP AC power adapter to
power the camera. If you use rechargeable NiMH
batteries, you can recharge the batteries in the camera
using the optional HP AC power adapter or optional
HP Photosmart M-series dock, or recharge the batteries
separately in the optional HP Photosmart quick recharger.
For more information, see Appendix B, Purchasing
Camera Accessories, starting on page 159.