HANNspree SN22A1 - Manual (Page 15)

SN22A1 14
Setting up the PC
This section describes how to set up your computer and make adjustments to the monitor.
Preparing to setup your PC
Before attempting to set up your computer, to protect the computer and monitor, you should:
• find a flat open area on your desk to position your computer
• place a soft item like the computer packaging bag on the desk for padding
1. Gently lay the screen face down on a flat clean padded surface. Pull the computer stand
apart from the computer.
2. Carefully lift the computer to set the best viewing angle by pulling the top of the display
forward.
It is suggested to install your computer in a space that allows for airflow as
restricting the airflow may cause overheating which could impact the
performance of your computer.
Please ensure the computer stand has been pulled up to its fully extended
position, so that your computer may stand firm and upright.